Mechanism of l-cysteine-induced fibrous structural changes of soybean protein at different high-moisture extrusion zones.

In this study, the fibrous structure formation mechanism of soybean protein during high moisture extrusion processing was investigated using a dead-stop operation, and based on the interaction between soybean protein concentrate (SPC) and L-cysteine (CYS). The thermal properties, SDS-PAGE and particle size distribution of the samples from different extrusion zones were investigated. It was revealed that the addition of a moderate amount of CYS (0.1 %) promoted the fibrous structure formation in the SPC extrudates and optimised the textural properties of the SPC extrudates. In the extruder barrel, addition of CYS (0.1 %) promoted protein depolymerisation and unfolding in the mixing and cooking zones, and facilitated protein aggregation in the die and cooling zones. Protein solubility and raman spectroscopy revealed that disulfide bonds were principally responsible for fibrous structure formation; favoured when the intermolecular disulfide bonds (t-g-t mode) was increased. Finally, the transformation of protein conformation was revealed by secondary structure and surface hydrophobicity, which confirmed that the effect of CYS on protein conformation mainly occurred in the cooling zone. This study provides a theoretical basis for the application of CYS to regulate the fibrous structure of meat analogues.

Transcriptomic response of citrus psyllid salivary glands to the infection of citrus Huanglongbing pathogen.

The Asian citrus psyllid, Diaphorina citri Kuwayama (Hemiptera: Psyllidae), is the key vector insect transmitting the Candidatus Liberibacter asiaticus (CLas) bacterium that causes the devastating citrus greening disease (Huanglongbing, HLB) worldwide. The D. citri salivary glands (SG) exhibit an important barrier against the transmission of HLB pathogen. However, knowledge on the molecular mechanism of SG defence against CLas infection is still limited. In the present study, we compared the SG transcriptomic response of CLas-free and CLas-infected D. citri using an illumine paired-end RNA sequencing. In total of 861 differentially expressed genes (DEGs) in the SG upon CLas infection, including 202 upregulated DEGs and 659 downregulated DEGs were identified. Functional annotation analysis showed that most of the DEGs were associated with cellular processes, metabolic processes, and the immune response. Gene ontology and Kyoto Encyclopaedia of Genes and Genomes enrichment analyses revealed that these DEGs were enriched in pathways involving carbohydrate metabolism, amino acid metabolism, the immune system, the digestive system, the lysosome, and endocytosis. A total of 16 DEGs were randomly selected to further validate the accuracy of RNA-Seq dataset by reverse-transcription quantitative polymerase chain reaction. This study provides substantial transcriptomic information regarding the SG of D. citri in response to CLas infection, which may shed light on the molecular interaction between D. citri and CLas, and provides new ideas for the prevention and control of citrus psyllid.

Co-delivery of vitamin C and ß-carotene in W/O/W emulsions stabilized by modified aggregated insoluble soybean protein hydrolysate-xanthan gum complexes.

Environmentally friendly emulsifiers safe for human consumption are urgently needed to stabilize emulsions for applications in the food industry. In this study, we prepared complexes combining modified aggregated insoluble soybean protein hydrolysate (AISPH) mixed with xanthan gum (XG) (0.05-0.3 %, w/v), and further to construct water-in-oil-in-water (W/O/W) emulsions to deliver vitamin C and ß-carotene. We observed a decrease in the AISPH α-helix and ß-sheet content, surface hydrophobicity, and fluorescence intensity all decreased after binding. In contrast, the particle size and absolute ξ-potential significantly increased, indicating that molecular non-covalent interactions occurred in the solution. The emulsification property of AISPH was also improved by adding XG, and the AISPH-XG-stabilized emulsion showed improved stability, encapsulation efficiency, and rheological properties. Among them, AISPH-XG-0.25-stabilized emulsion exhibited a smaller particle size (8.41 ± 0.49 µm) and the highest encapsulation efficiency for vitamin C (90.03 ± 0.23 %) and ß-carotene (70.56 ± 0.06 %). Additionally, simulated gastric digestion indicated that vitamin C and ß-carotene bioavailability increased by 3.6 and 5.8 times, respectively. Finally, the emulsion exhibited good pH, ionic, and thermal stability. In general, AISPH-XG-stabilized W/O/W emulsions showed good stability and carrying capacity, providing a theoretical basis for improving their application.

Application of emerging thermal and nonthermal technologies for improving textural properties of food grains: A critical review.

Emerging nonthermal and thermal food processing technologies are a better alternative to conventional thermal processing techniques because they offer high-quality, minimally processed food. Texture is important in the food industry because it encompasses several product attributes and plays a vital role in consumer acceptance. Therefore, it is imperative to analyze the extent to which these technologies influence the textural attributes of food grains. Physical forces produced by cavitation are attributed to ultrasound treatment-induced changes in the conformational and structural properties of food proteins. Pulsed electric field treatment causes polarization of starch granules, damaging the dense outer layer of starch granules and decreasing the mechanical strength of starch. Prolonged radio frequency heating results in the denaturation of proteins and gelatinization of starch, thus reducing binding tendency during cooking. Microwave energy induces rapid removal of water from the product surface, resulting in lower bulk density, low shrinkage, and a porous structure. However, evaluating the influence of these techniques on food grain texture is difficult owing to differences in their primary operation mode, operating conditions, and equipment design. To maximize the advantages of nonthermal and thermal technologies, in-depth research should be conducted on their effects on the textural properties of different food grains while ensuring the selection of appropriate operating conditions for each food grain type. This article summarizes all recent developments in these emerging processing technologies for food grains, discusses their potential applications and drawbacks, and presents prospects for future developments in food texture enhancement.

A murine model to evaluate immunotherapy effectiveness for human Fanconi anemia-mutated acute myeloid leukemia.

Fanconi anemia (FA)-mutated acute myeloid leukemia (AML) is a secondary AML with very poor prognosis and limited therapeutic options due to increased sensitivity to DNA-damaging agents. PD-1 immune checkpoint inhibitors upregulate T-cell killing of cancer cells and is a class of promising treatment for FA-AML. Here, we developed a novel FA-AML murine model that allows the study of human AML with a humanized immune system in order to investigate immunotherapeutic treatments in vivo. FA-AML1 cells and non-FA-mutated Kasumi-1 cells were injected into 8-10 week old NSG mice. Once leukemic engraftment was confirmed by HLA-DR expression in the peripheral blood, human peripheral blood mononuclear cells (hPBMCs) were injected into the mice. One week post-hPBMCs injection, Nivolumab (PD-1 inhibitor) or PBS vehicle control was administered to the mice bi-weekly. In our Nivolumab treated mice, FA-AML1, but not Kasumi-1-engrafted mice, had significantly prolonged overall survival. Both FA-AML1 and Kasumi-1 engrafted mice had decreased spleen weights. Higher leukemic infiltration into vital organs was observed in FA-AML1 engrafted mice compared to Kasumi-1 engrafted mice. In conclusion, our novel humanized murine model of FA-mutated AML is an attractive tool for supporting further studies and clinical trials using PD-1 inhibitors to treat FA-mutated AML.

Investigation of the effect and mechanism of nanocellulose on soy protein isolate- konjac glucomannan composite hydrogel system.

To enrich the application of nanocomposite hydrogels, we introduced two types of nanocellulose (CNC, cellulose nanocrystals; CNF, cellulose nanofibers) into the soy protein isolate(SPI)- konjac glucomannan (KGM) composite hydrogel system, respectively. The similarities and differences between the two types of nanocellulose as textural improvers of composite gels were successfully explored, and a model was developed to elaborate their interaction mechanisms. Appropriate levels of CNC (1.0 %) and CNF (0.75 %) prolonged SPI denaturation within the system, exposed more buried functional groups, improved molecular interactions, and strengthened the honeycomb structural skeleton formed by KGM. The addition of CNC resulted in greater gel strength (SKC1 2708.53 g vs. Control 810.35 g), while the addition of CNF improved the elasticity (SKF0.75 1940.24 g vs. Control 405.34 g). This was mainly attributed to the reinforcement of the honeycomb-structured, water binding and trapping, and the synergistic effect of covalent (disulfide bonds) and non-covalent interactions (hydrogen bonds, ionic bonds) within the gel network. However, the balance and interactions between proteins and polysaccharides were disrupted in the composite system with excessive CNF addition (≥0.75 %), which broken the stability of the honeycomb-like structure. We expect this study will draw attention on potential applications of CNC and CNF in protein-polysaccharide binary systems and facilitate the creation of novel, superior, mechanically strength-regulated nanofiber composite gels.

MIGGRI: A multi-instance graph neural network model for inferring gene regulatory networks for Drosophila from spatial expression images.

Recent breakthrough in spatial transcriptomics has brought great opportunities for exploring gene regulatory networks (GRNs) from a brand-new perspective. Especially, the local expression patterns and spatio-temporal regulation mechanisms captured by spatial expression images allow more delicate delineation of the interplay between transcript factors and their target genes. However, the complexity and size of spatial image collections pose significant challenges to GRN inference using image-based methods. Extracting regulatory information from expression images is difficult due to the lack of supervision and the multi-instance nature of the problem, where a gene often corresponds to multiple images captured from different views. While graph models, particularly graph neural networks, have emerged as a promising method for leveraging underlying structure information from known GRNs, incorporating expression images into graphs is not straightforward. To address these challenges, we propose a two-stage approach, MIGGRI, for capturing comprehensive regulatory patterns from image collections for each gene and known interactions. Our approach involves a multi-instance graph neural network (GNN) model for GRN inference, which first extracts gene regulatory features from spatial expression images via contrastive learning, and then feeds them to a multi-instance GNN for semi-supervised learning. We apply our approach to a large set of Drosophila embryonic spatial gene expression images. MIGGRI achieves outstanding performance in the inference of GRNs for early eye development and mesoderm development of Drosophila, and shows robustness in the scenarios of missing image information. Additionally, we perform interpretable analysis on image reconstruction and functional subgraphs that may reveal potential pathways or coordinate regulations. By leveraging the power of graph neural networks and the information contained in spatial expression images, our approach has the potential to advance our understanding of gene regulation in complex biological systems.

Effect of nasal high-flow oxygen humidification on patients after cardiac surgery.

Background: Although high-flow humidified oxygen therapy (HFNC) has emerged as an important treatment for respiratory failure, few studies have reported on whether HFNC is appropriate for patients with hypoxemia after cardiac surgery, and the clinical efficacy of HFNC in patients undergoing cardiac surgery is unclear. Objective: To investigate the clinical effect of HFNC after cardiac surgery. Methods: Convenience sampling was used to select 76 patients who underwent invasive mechanical ventilation and oxygen therapy after valve replacement or coronary artery bypass grafting from July 2019 to June 2021. The patients were divided into the routine group and the HFNC group according to the oxygen therapy provided after the operation. The patients in the routine group (N = 38) were treated with oxygen inhalation by face mask after the operation, while those in the HFNC group (N = 38) were treated with HFNC via nasal cavity. The arterial partial pressure of oxygen (PaO2), the arterial partial pressure of carbon dioxide (PaCO2) and the oxygenation index (OI) were observed and compared between the two groups at 6 h, 12 h and 24 h after treatment. The sputum viscosity, incidence of second intubation and the intensive care unit (ICU) stay time were evaluated. Results: The difference in PaCO2 between the two groups was statistically significant at 24 h after treatment (p < 0.05). The PaO2 in the HFNC group was significantly higher than in the routine group at 24 h after treatment, and the OI of the routine group was lower than in the HFNC group at 6 h, 12 h and 24 h after treatment (p < 0.05). The sputum viscosity in the HFNC group was better than in the routine group at 12 h and 24 h after treatment. The second intubation rate and ICU stay time in the HFNC group were lower than in the routine group (p < 0.05). Conclusion: Compared with conventional mask oxygen inhalation, HFNC can effectively reduce sputum viscosity, improve oxygenation, reduce the incidence of repeated intubation and meet patients' comfort needs. It is an advantageous respiratory support strategy for patients after cardiac surgery compared with invasive mechanical ventilation to oxygen therapy and is beneficial to the recovery of cardiopulmonary function.

Effect of ultrasound treatment on thawing process of frozen tofu prepared with different salt coagulants.

This study investigated the effects of ultrasound-assisted water thawing (UWT) at different power levels (0, 100, 150, 200, and 250 W) on the thawing rate and gel properties of frozen tofu made using three different salt coagulants (CaCl2, CaSO4, and MgCl2). Tofu produced with CaCl2 and CaSO4 elicited gel structures with dense and homogeneous networks, while that with MgCl2 had rough pores and irregular networks. UWT treatment significantly decreased thawing time by 30.9-53.5% compared to the control. Water holding capacity and scanning electron microscopy analyses demonstrated that UWT-100, UWT-150, and UWT-200 should be used to increase the amount of fixed water for CaCl2, CaSO4, and MgCl2. These findings suggest that appropriate ultrasonic treatment could improve the water retention capacity of the tofu network and make the gel network structure more compact. Additionally, protein structural analysis showed a decrease in the exposure of hydrophobic groups and reduced protein denaturation when tofu prepared with all the coagulants were thawed with UWT energies of 100-200 W ultrasonication. These findings offer theoretical support for improving the frozen tofu thawing process while ensuring optimal final product quality.

Effect of Na+ and Ca2+ on the texture, structure and microstructure of composite protein gel of mung bean protein and wheat gluten.

To investigate the change of ionic strength on the gel characteristics during the processing of mung bean protein-based foods, the effects of NaCl and CaCl2 at different concentrations (0-0.005 g/mL) on the properties of mung bean protein (MBP) and wheat gluten (WG) composite protein gel were studied. The results showed that low concentration (0.001-0.002 g/mL) could significantly improve the water holding capacity (WHC), storage modulus (G') and texture properties of composite protein gel (MBP/WG), while the surface hydrophobicity (H0) and solubility were significantly decreased (P < 0.05). With the increase of ion concentration, the secondary structures of MBP/WG shifted from α-helix to ß-sheet, and the fluorescence spectra also showed fluorescence quenching phenomenon. By analyzing the intermolecular forces of MBP/WG, it was found that with the addition of salt ions, the hydrogen bonds was weakened and the electrostatic interactions, hydrophobic interactions and disulfide bonds were enhanced, which in turn the aggregation behavior of MBP/WG composite protein gel was affected and larger aggregates between the proteins were formed. It could be also demonstrated that the gel network was denser due to the addition of these large aggregates, thus the gel properties of MBP/WG was improved. However, too many salt ions could disrupt the stable network structure of protein gel. This study can provide theoretical support to expand the development of new mung bean protein products.

Optimized electronic properties and nano-structural features for securing high thermoelectric performance in doped GeTe.

Recently, thermoelectric (TE) materials have been attracting great attention due to their improved capability to convert heat directly into electricity. PbTe-based TE materials are among the most competitive ones; however, lead toxicity limits their potential applications. Thus, the current focus in the field is on the discovery of lead-free analogues. GeTe is considered to be a promising candidate, however, its thermoelectric performance is limited by a non-ideal band structure and intrinsic Ge vacancies. In this work, GeTe was co-doped with Bi, Zn, and In. Initial doping with Bi enhances the performance by tuning the electronic properties and bringing down the thermal conductivity. Subsequent Zn doping permits to maintain the high power factor by increasing carrier mobility and reducing carrier concentration. Additionally, Zn incorporation lowers thermal conductivity and, thus, increases the performance. Subsequent In doping in (Ge0.97Zn0.02In0.01Te)0.97(Bi2Te3)0.03 reduces thermal conductivity even further and makes this material the best performing one. Scanning transmission electron microscopy shows the presence of nano twinning, defect layers, and dislocation bands that contribute to the suppression of the lattice thermal conductivity. A peak zT value of 2.06 and an average zT value of 1.30 have been achieved in (Ge0.97Zn0.02In0.01Te)0.97(Bi2Te3)0.03. These results are among the best state-of-the-art thermoelectric materials.

Effects of emerging food pretreatment and drying techniques on protein structures, functional and nutritional properties: An updated review.

Protein is one of the most important components of food which significantly contributes to the structure, functionality, and sensory properties which may affect consumer acceptability of processed products. Conventional thermal processing affects protein structure and induce undesirable degradation of food quality. This review provides an overview of emerging pretreatment and drying technologies (plasma treatment, ultrasound treatment, electrohydrodynamic, radio frequency, microwave, and superheated steam drying) in food processing by assessing protein structural changes to enhance functional and nutritional properties. In addition, mechanisms and principles of these modern technologies are described while challenges and opportunities for the development of these techniques in the drying process are also critically analyzed. Plasma discharges can lead to oxidative reactions and cross-linking of proteins that can change the structure of proteins. Microwave heating contributes to the occurrence of isopeptide or disulfide bonds which promotes α-helix and ß-turn formation. These emerging technologies can be adopted to improve protein surface by exposing more hydrophobic groups which restrict water interaction. It is expected that these innovative processing technologies should become a preferred choice in the food industry for better food quality. Moreover, there are some limitations for industrial scale application of these emerging technologies that need to be addressed.

Use of soybean oil to modulate the gel properties of soybean protein isolation-wheat gluten composite with or without CaCl2.

BACKGROUND: Plant protein is widely used in the study of animal protein substitutes and healthy sustainable products. The gel properties are crucial for the production of plant protein foods. Therefore, the present study investigated the use of soybean oil to modulate the gel properties of soybean protein isolation-wheat gluten composite with or without CaCl2 . RESULTS: Oil droplets filled protein network pores under the addition of soybean oil (1-2%). This resulted in an enhanced gel hardness and water holding capacity. Further addition of soybean oil (3-4%), oil droplets and some protein-oil compounds increased the distance between the protein molecule chain. The results of Fourier transform infrared spectroscopy and intermolecular interaction also showed that the disulfide bond and ß-sheet ratio decreased in the gel system, which damaged the overall structure of the gel network. Compared with the addition of 0 m CaCl2 , salt ion reduced the electrostatic repulsion between proteins, and local protein cross-linking was more intense at 0.005 m CaCl2 concentration. In the present study, structural properties and rheological analysis showed that the overall strength of the gel was weakened after the addition of CaCl2 . CONCLUSION: The presence of appropriate amount of soybean oil can fill the gel pores and improve the texture properties and network structure of soy protein isolate-wheat gluten (SPI-WG) composite gel. Excessive soybean oil may hinder protein-protein interaction and adversely affect protein gel. In addition, the presence or absence of CaCl2 significantly affected the gelling properties of SPI-WG composite protein gels. © 2023 Society of Chemical Industry.

Impact of Insoluble Dietary Fiber and CaCl2 on Structural Properties of Soybean Protein Isolate-Wheat Gluten Composite Gel.

The effect and mechanism of soybean insoluble dietary fiber (SIDF) (0~4%) and CaCl2 (0~0.005 M) on the properties of soybean protein isolate (SPI)-wheat gluten (WG) composite gel were studied. It was revealed that the addition of insoluble dietary fiber (1~2%) increased the strength and water-holding capacity (WHC) of the composite gel (p < 0.05) and enhanced the gel network structure compared with the control. WHC and LF-NMR showed that the water-binding ability of the gel system with only 2% SIDF was the strongest. The addition of excessive SIDF increased the distance between protein molecules, impeded the cross-linking of protein, and formed a three-dimensional network with low gel strength. The infrared spectrum and intermolecular force indicated that the interaction between SIDF and SPI were mainly physical, and the hydrophobic interaction and disulfide bond were the main forces in the gel system. The addition of CaCl2 can increase the critical content of gel texture destruction caused by SIDF, and the gel strength attained its peak at 3% SIDF, indicating that appropriate CaCl2 improved gel structure weakening caused by excessive SIDF. This study provides insights in enhancing the production of multi-component composite gel systems.

Fabrication and characterization of succinylated and glycosylated soy protein isolate and its self-assembled nanogel.

In this study, we used succinic anhydride (SA) acylation and dextran (DX) glycosylation modified soybean isolate protein (SPI) to develop self-assembled SPI-SA-DX adduct-based nanogels. Degree of modification, SDS-PAGE, and FT-IR studies showed that the amino group of the SPI was replaced by hydrophilic dextran and succinic acid carboxyl groups. Dextran chain and anhydride group attachment to the soybean protein surface enhanced hydrophilicity and spatial site blocking. Modification-induced protein structure unfolding, free sulfhydryl groups to be converted to disulfide bonds, and reduced surface hydrophobicity (H0). H0 was lowest at 33,750 ± 1008.29 when SA content = 10 % protein content (SPI-SA3-DX). The nanometer gel based on SPI-SA3-DX had the maximum turbidity and clear transparent solution without precipitation. Its particle size and polymer dispersibility index (PDI) were also the smallest, with values of (106.87 ± 4.51) nm and 0.21 ± 0.009, respectively. Transmission electron microscopy showed that nanogels had subspherical shell-core structures. Nanogels were stable under different pH, ionic strength, high temperature, and storage conditions.

Autoantibodies of inflammatory cytokines as serum biomarkers in OSA patients.

As many as 90% of patients with obstructive sleep apnea (OSA) may be undiagnosed. It is necessary to explore the potential value of autoantibodies against CRP, IL-6, IL-8 and TNF-α in the diagnosis of OSA. ELISA was performed to detect the level of autoantibodies against CRP, IL-6, IL-8 and TNF-α in sera from 264 OSA patients and 231 normal controls (NCs). The expression level of autoantibodies against CRP, IL-6 and IL-8 in OSA were significantly higher than that in NC while the level of anti-TNF-α was lower in OSA than that in NC. The per SD increment of anti-CRP, anti-IL-6 and anti-IL-8 autoantibodies were significantly associated with a 430%, 100% and 31% higher risk for OSA, respectively. The AUC of anti-CRP was 0.808 (95% CI: 0.771-0.845) when comparing OSA with NC, while the AUC increased to 0.876 (95% CI: 0.846-0.906) combining four autoantibodies. For discrimination of severe OSA versus NC and non-severe OSA versus NC, the AUC for four autoantibodies combination was 0.885 (95% CI: 0.851-0.918) and 0.876 (95% CI: 0.842-0.913). This study revealed the association between autoantibodies against inflammatory factors and OSA, and the combination of autoantibodies against CRP, IL-6, IL-8 and TNF-α may function as novel biomarker for monitoring the presence of OSA.

Effect of polysaccharides on the rheological behaviour of soy-wheat protein aggregation and conformational changes during high-moisture extrusion.

BACKGROUND: Due to the extrusion black box effect, polysaccharides determine the formation of meat-like fibrous structures by modulating the flow behaviour and structural changes of plant proteins under high-moisture extrusion conditions. However, there is limited knowledge on the mechanism of resolution. This study simulated the rheological properties of soy protein-wheat protein under 57% moisture conditions with addition of 4% sodium alginate (SA), 2% xanthan gum (XG), and 2% maltodextrin (MD). The effect of these polysaccharides on the aggregation behaviour and conformation of raw protein during high-moisture extrusion was investigated. RESULTS: It was revealed that the three polysaccharides were effective in increasing the interaction between proteins and between proteins and water. Among them, 4% SA elicited a significantly stronger storage modulus (gelation behaviour) compared to the control. Analysis of different zones of extrudates by protein electrophoresis, particle size, and turbidity showed that SA-4% was able to form more high molecular protein aggregates (> 245 kDa) and promoted crosslinking of low molecular subunits (< 48 kDa), resulting in moderately sized protein aggregated particles. Fluorescence and ultraviolet spectra showed the transformation of protein tertiary structures in different extrusion zones, confirming that the key extrusion zone for protein conformational transformation by polysaccharides is the die-cooling zone. Furthermore, stretching of polypeptide chains and accelerated protein rearrangement facilitated the formation of more fibrillar structures. CONCLUSION: Theoretical support for polysaccharide modulation of plant protein quality in high moisture extruded products is provided by this study. © 2023 Society of Chemical Industry.

Association of IL-27 gene rs153109 and rs17855750 polymorphisms with preeclampsia susceptibility and severity: Meta-analysis and trial sequential analysis.

BACKGROUND: The aim of this meta-analysis is to evaluate the association of interleukin-27 gene rs153109 and rs17855750 polymorphisms with preeclampsia susceptibility and severity. METHODS: Web of Science, PubMed, Embase, CBM, WanFang Data, CNKI, and VIP database were used for retrieving. After screening with our inclusion and exclusion criteria, data extraction and quantity evaluation were performed by 2 independent authors. Included case-control studies were used for meta-analysis by RevMan 5.4, and sensitivity analysis was carried out through 1-by-1 exclusion procedure. If heterogeneity exists, then random effects model was used; otherwise, fixed effect model was used. Publication bias analysis was performed using Begg test and Egger test. Trial sequential analysis was performed using trial sequential analysis 0.9.5.10 Beta. RESULTS: A total of 5 articles were included. The heterogeneity was high across most models during the meta-analysis. Meta-analysis results related to preeclampsia susceptibility showed that P values of all the models were higher than .05, while for meta-analysis results related to preeclampsia severity showed that P values of all the models were higher than .05 except for TT versus TG + GG and TT versus TG models of rs17855750 group. The sensitivity of the meta-analysis was high, and trial sequential analysis showed the possibility of false negative results. No obvious publication bias was found. CONCLUSIONS: There is no obvious association between interleukin-27 gene rs153109 and rs17855750 polymorphisms and preeclampsia susceptibility or severity. However, more multi-center and large sample case-control studies are expected to be carried out to verify our conclusion in the future.

Multi-dimensional analysis of heat-induced soybean protein hydrolysate gels subjected to ultrasound-assisted pH pretreatment.

This study aimed to evaluate the gelation characteristics of soybean protein hydrolysate (SPH) extracted by enzyme-assisted aqueous extraction. Specifically, the changes in gelation behaviors for heat-induced (95 °C, 20 min) SPH dispersions treated with pH (pH 3, 5, 9; pH 7 as control) and ultrasound (U; 240 W, 30 min) were investigated. The results showed that typical gel behavior with high elastic nature in the viscoelasticity and network structures were observed during the heating process, where the disulfide bond played a dominant role in the gel network formation of all the samples. Notably, the heat-induced aggregation in the SPH gels was mainly formed by the association of the basic B polypeptide in 11S and ß subunit in 7S. The most superior SPH gel was formed at pH 7 when assisted by ultrasonication during the heating process. This as-synthesized gel showed a uniform filamentous structure and exhibited the more excellent textural, rheological and thermal properties than those of the samples formed under acidic and alkaline conditions. These results are of great value in revealing the gelation mechanism of SPH.

Immune activation and exhaustion marker expression on T-cell subsets in ART-treated adolescents and young adults with perinatal HIV-1 infection as correlates of viral persistence.

HIV-1 infection in memory CD4+ T cells forms a latent reservoir that is a barrier to cure. Identification of immune biomarkers that correlate with HIV-1 reservoir size may aid with evaluating efficacy of HIV-1 eradication strategies, towards ART-free remission and cure. In adults living with non-perinatal HIV-1, the immune exhaustion marker PD-1 on central memory CD4+ T cells (Tcm) correlates with measures of HIV-1 reservoir size. Immune correlates of HIV-1 are less defined in adolescents and young adults with perinatal HIV-1. With multi-parameter flow cytometry, we examined immune activation (CD69, CD25, HLA-DR), and exhaustion (PD-1, TIGIT, TIM-3 and LAG-3) markers on CD4+ T cell subsets (naïve (Tn), central memory (Tcm), and the combination (Ttem) of transitional (Ttm) and effector memory (Tem) cells, in 10 adolescents and young adults living with perinatal HIV-1 (median age 15.9 years; median duration of virologic suppression 7.0 years), in whom HIV-1 reservoir size was measured with the Intact Proviral HIV-1 DNA Assay (IPDA) and an enhanced Tat/Rev limiting dilution assay (TILDA). RNA-seq was also performed on the unstimulated CD4+ T cells. The median total HIV-1 DNA concentration in memory CD4+ T cells was 211.90 copies per million CD4+ T cells. In the 7 participants with subtype B HIV-1 infection, the median intact proviral DNA load was 7.96 copies per million CD4+ T cells. Levels of HLA-DR and TIGIT on the Ttem were correlated with total HIV-1 DNA (r=0.76, p=0.015) and (r=0.72, p=0.023), respectively, but not with intact proviral load or induced reservoir size. HIV-1 DNA load was also positively correlated with transcriptional clusters associated with HLA-DR expression by RNA-seq. In contrast, PD-1 expression on Tcm was inversely correlated with total HIV-1 DNA (r=-0.67, p=0.039). Reservoir size by IPDA and TILDA were correlated (r=0.81, p=0.036). Thus, in this cohort of youths with long-standing treated perinatal infection, HLA-DR and TIGIT on Ttem were the key correlates of HIV-1 infected cell frequencies by total HIV-1 DNA, and not PD-1. Total HIV-1 DNA was negatively correlated with PD-1 expressing Tcm. These differences in longstanding perinatal HIV-1 infection compared with adult infection requires further study in larger cohorts.